P1.667 HD LED Video Wall TV LED Panel Screen Indoor Full Color SMD1010
1. LED lamp adopts silicone compression moulding encapsulation,enhance LED chip reliablity,good consistency of color temperature,higher cost performance.
2. Black led lamp + black mask,show high contrast ratio and better visual effict.
3. High S-PWM drive IC,high refresh rate,high gray scale,high brightness,no ghsting effict.
4. Single point brightness and color calibration,color consistency is better.
5. Board to board design,no ribbon cable connector type connection,improve the stability,convenient installation and disassembly maintence.
6. Brushed aluminum suite,beautiful,vogue and heat dissipation is more than ten times faster than the plastic suite.
7. Easy maintenance by same screw,one tool
| Parameter | Value |
| Pixel Configuration | SMD1010 |
| Pixel pitch (mm) | 1.667 |
| Pixel matrix per panel | 240*180 |
| Pixel density (pixel/sqm) | 360000 |
| Cabinet Dimensions(L*W) mm | 400*300 |
| Module Dimensions(L*W) mm | 200*150 |
| Panel material | Die-casting aluminum |
| Cabinet weight(kg) | 5 |
| Colour grayscale (bit) | 12-16bit |
| Gray scale per colour (level) | 4096-65535 |
| Refresh rate (hz) | >3840 |
| Driving type | 1/32 |
| Signal transmission distance (m) | cats cable:<100m
single mode fiber:<10km |
| Brightness (nit) | 200-1200 can control |
| Optimal horizontal viewing angle (degree) | 160 |
| Optimal vertical viewing angle (degree | 160 |
| Ac input voltage (v) | Ac220 |
| Ac input frequency (hz) | 50/60 |
| Ac input power maximum value (w/sqm) | 750 |
| Ac input power typical value (w/sqm) | 100-300 |
| Storage temperature (℃) | -25-70 |
| Work temperature (℃) | -10-60 |
| IP rating (front/rear) | IP41 |
| Storage humidity (rh) | 10%-90% non -condensing |
| Working humidity (rh) | 10%-90% non-condersing |
| Lifetime Typical value (hrs) | 100000 |
Product Tags:
|
|
P1.667 HD LED Video Wall TV LED Panel Screen Indoor Full Color SMD1010 Images
|
